Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

thanks for the info, I'm going to wait and see what the dealer comes up with. I was informed that this will be a warranty issue. My concern is that the warranty is comming to an end and then what? I have e-mailed JD with my concerns with no response, anyone have an idea how to get in touch with the JD rep in Vermont / NY. Here's more info on the crack, the dealer seems to think the draw bar has been hit direct (hard), and this would cause enough stress to crack the rear end. I don't believe you would be able hit the rear end while having a bush hog on as well I know I did not hit or bottom out while bush hogging. There are no physical holes in the casting only a long crack which is very hard to see with the naked eye, there is a lot of oil leaking, over night a gallon and half leak out prior to bringing it back to the dealership. thanks and look foward to all inputs.

cracked rear end
John Deere Tractors
Replies 8 Post by Brian M

You can use this link which will provide you with a copy of all the manuals for free and you can burn it to CD, I have had a Kubota, NH and now a JD which I have found JD to have the best web sights from recalls to special offer, I think you will be very happy with your purchase.
http://www.deere.com

manual on cd
John Deere Tractors
Replies 3 Post by Brian M

I found that JD has it's own type of quick connects for rear remotes, someone mentioned to me that you can use regular connections with JD, you have to shut off the tractor and relieve all pressure on the tractor. Has anyone had luck or knowledge on this matter

pickup my 4710
John Deere Tractors
Replies 9 Post by Brian M

Try Gagne equipment in Sutton, Canada. I have the Pronovost
74 and they will have it painted at the factory the color of your tracto for an extra 50 bucks, out the the door was1400.00 U.S. telephone # 1-450-538-2009. and for an extra 150 canadian you can get a hyd cylinder chute. good luck.

snow blower price
Snowblowers / Snow Plows
Replies 7 Post by Brian M

Food for thought, You can tap into the hazard lights which
will elminate the need for a seperate switch as well I mounted my lights at the top of the rops upside down, so they wont come into contact with garage doors. You can drill small holes into your rops and fish the wire down inside the rops so you will have a nice clean looking job.
I purchased my (2) 12v lights at napa for $7.00 each.

33d light kit
New Holland Tractors
Replies 5 Post by Brian M

I just bought a 2001 4200 HST with FEL. The reverse pedal is real stiff. I have to mash down on it much harder than the forward pedal. Does anyone else have this problem? Other than that I love this tractor.

JD 4200 Reverse
John Deere Tractors
Replies 1 Post by Brian M

I have B2910 HST and have a 6 foot finish mower on the back of my tractor. It works quite well with power to spare. I don't remenber the name off hand, but it is a major brand mower, it has four dolly wheels on it.

Kubota B2910 vs L3010
Kubota Tractors
Replies 7 Post by Brian M